Chengdu Eson New Material Co., Ltd.
Your Rubber Assistance
Add to Cart
High tensile strength silicone rubber solid 30-80 Shore A General purpose Silicone compound
Description:
Mixed silicone rubber is a synthetic rubber produced by adding raw silicone rubber to a two-roll rubber mixing machine or a closed kneader by gradually adding white carbon black, silicone oil, and other additives.
It has excellent thermal stability, high and low temperature resistance, can work for a long time at -60℃～+250℃, anti-ozone, weather resistance and good electrical properties, strong resistance to corona, arc, and electric spark, and chemical stability Resistance, weathering resistance, radiation resistance, physiological inertness and good air permeability.
It can be widely used in aviation, cables, electronics, electrical appliances, chemicals, meters, cement, automobiles, construction, food processing, medical equipment and other industries,and used for deep processing of machinery such as molding and extrusion.
High tensile strength precipitated
Applicated: suitable for complicated shaped products, Kitchen products, etc.
Features: High tensile strength, good machining performance, can approval Rohs, Reach test.
Processing temperature and time: 75 Degree @ 5 min by molding.
compression molding, extrusion, injection molding
| Grade | ES-130-1 | ES140-1 | ES150-1 | ES160-1 | ES170-1 | ES180-1 |
| Appearance | Natural or any colors | |||||
| Hardness, Shore A | 30 | 40 | 50 | 60 | 70 | 80 |
| Tensile Strength, Mpa | 8 | 8.5 | 9 | 8.5 | 8 | 8 |
| Elongation at break, % | 650 | 580 | 500 | 400 | 270 | 180 |
| Tear Strength, Kn/m | 18 | 18 | 20 | 20 | 20 | 18 |
| Density, g/cm3 | 1.09 | 1.12 | 1.16 | 1.19 | 1.2 | 1.21 |
| Plasticity, | 150 | 170 | 280 | 320 | 280 | 330 |
General purpose fumed silicone
Application: daily sheathing, office rubber products, kitchenware, industrial products.
Feature:high tensile strength, good transparency, easy processing, can approval FDA, Rohs test.
Processing temperature and time: 75 Degree @ 5 min by molding.
Processing method: compression molding, extrusion, injection molding
| Grade | ES-230-1 | ES240-1 | ES250-1 | ES260-1 | ES270-1 | ES280-1 |
| Appearance | Natural or any colors | |||||
| Hardness, Shore A | 30 | 40 | 50 | 60 | 70 | 80 |
| Tensile Strength, Mpa | 8.5 | 9 | 9 | 9.5 | 9 | 8.5 |
| Elongation at break, % | 800 | 580 | 450 | 400 | 330 | 220 |
| Tear Strength, Kn/m | 16 | 28 | 24 | 25 | 28 | 25 |
| Density, g/cm3 | 1.08 | 1.11 | 1.14 | 1.17 | 1.19 | 1.2 |
| Plasticity, | 150 | 180 | 210 | 260 | 200 | 330 |
Picture show:
