Chengdu Eson New Material Co., Ltd.
Your Rubber Assistance
Add to Cart
Low Compression Set Series FVMQ Fluorosilicone Elastomer Compound oil resistance
Description:
The fluorosilicone rubber compound is based on fluorosilicone elastomer, mixed with a uniform mixture of various fillers and additives.
Product performance: Fluorosilicone rubber compound is a transparent rubber compound, which combines the advantages of silicone rubber and fluorine rubber;
1. Wide operating temperature range -50~220℃;
2. It has solvent and oil resistance similar to fluorine rubber;
3. Retain the advantage of high tensile retention rate of silicone rubber at high temperature;
4. Good insulation performance.
5. Low air permeability, meeting environmental protection requirements.
Therefore, it is suitable for sealing fluorosilicone rubber compound that is resistant to high and low temperature, oil and medium. The product composition of fluorosilicone rubber is based on fluorosilicone elastomer, with a uniform mixture of various fillers and additives.
Product performance: Fluorosilicone rubber compound transparent rubber compound, which combines the advantages of silicone rubber and fluorine rubber;
1. Wide operating temperature range -50~220℃;
2. Has solvent and oil resistance similar to fluorine rubber;
3. Retain the advantages of high tensile retention rate of silicone rubber at high temperature;
4. Good insulation performance.
5. Low air permeability, meeting environmental protection requirements.
Application:
Seals or contacts that are resistant to fuel oil and lubricating oil on aircraft. Such as various O-rings, sealing rings, sensor materials, diaphragms, gaskets, etc.,can also be used for integral fuel tank sealing.
Automobile industry: all kinds of vehicle sealing rings, oil seals, diaphragms, conduits, valves, turbochargers, etc. Petrochemical industry: all kinds of sealing products on pumps, valves, oil tanks and other equipment resistant to high and low temperatures and chemical corrosion.
Military industry: used in harsh environments requiring low temperature resistance, oil resistance, and acid resistance.
Such as the hydraulic system of military aircraft, liquid bellows, special vehicle doors and windows, rear cover sealing strips, sensor materials.
Chemical industry: seals.
Data sheet:
Low Compression Set Grades
| Dow Corning | Chengdu Eson | |||||||
| Grade | LS 4-9040 | LS 4-9060 | LS 2380U | LS 4-9080 | NFS9340 | NFS9360 | NFS9370 | NFS9380 |
| Gravity g/cm3 | 1.4 | 1.45 | 1.49 | 1.55 | 1.40 | 1.46 | 1.47 | 1.56 |
| Hardness Shore A | 40 | 59 | 70 | 81 | 38 | 60 | 70 | 80 |
| Tensile Strength MPa | 8.2 | 9.2 | 8.4 | 7.5 | 8.5 | 9.1 | 8.4 | 7 |
| Elongation At Break % | 415 | 348 | 200 | 159 | 400 | 320 | 300 | 145 |
Picture show:
