Add to Cart
Thin 1.2mm one layer polyester fiber fabric FKM Sheet reinforced rubber sheeting
Description: Fluoroelastomer have very good heat resistance and chemical resistance, Corrosion resistance,
tear resistance, wear resistance, corrosion resistance of more than 300 chemicals, oil resistance, fuel resistance,
lubricant resistance, resistance to most mineral acids, resistance to a variety of aliphatic and aromatic hydrocarbons
swelling other rubber, low flammability, excellent resistance to atmospheric oxidation, sunlight and weather, excellent
mildew and mildew resistance. For a wide range of substances, including oxidized automobile fuel.
Fabric added tensile strength >12mpa, its suitable for make fabri diaphragm by cutting.
Size:Thickness:1.2mm-20mm
Width: 1m and 1.2m and 1.5mm
Length: Not limited but should be easy packing
Fabric type: glass fiber or polyester fiber
Fabric sheet feature: better pressure resistance, better wear-resisting, better toughness.
Sheet data sheet:
Typical property | |||||
Test item | Result | Test standard | |||
Hardness, Shore A | 70 | GB/T 531.1-2008 | |||
Tensile strength,Mpa | 11.58 | GB/T 528-2009 | |||
Elongation at break, % | 205.13 | ||||
Size test | |||||
Test item | Nominal diamension | Tolerance Range | Inspection result,mm | Standard | |
Diameter | 9.5mm | ±0.2 | 1.4mm-1.51mm | DIN 7715 Klasse P2 |
Picture Show: