Add to Cart
High Tear Strength Silicone HTV High Temperature Food Grade Vmq Silicone Rubber Products Raw Material
Differences between platinum silica gel and ordinary silica gel:
Ordinary silica gel:
1. Commonly used precipitation method silicone rubber product raw materials, used in the production of ordinary products
2. Adopt ordinary translucent silica gel raw material and dao traditional ordinary vulcanization mixing, the material performance is ordinary.
3. Product performance is general film, with environmental conflicts, conflicts with light, oxygen, heat and other environments
4. Long-term use in various environments will cause yellowing and deformation. Not anti-yellowing, smelly.
5. The products are mainly used in industry, construction, electronics and other fields, and their performance will gradually age under long-term use.
Perkin Silicone:
1. The raw material is made by mixing and vulcanizing high-transparent gas-phase silica gel with two-component Perkin vulcanizing agent.
2. It can reach food-grade silica gel products, with good inertness, outstanding fluidity, and curing time.
3. There will be no yellowing or deformation in long-term use, and the safety performance is more prominent, efficient and tasteless, long service life, and outstanding performance.
4. It is mainly suitable for FDA food grade environmentally friendly products, products with relatively high performance requirements, and relatively high cost.
Introduction to Platinum Silica Gel:
1. Platinum vulcanized low temperature silica gel is a two-component solid silica gel, which has the characteristics of low vulcanization temperature and fast vulcanization speed, and is suitable for compression molding.
2. Platinum vulcanized low-temperature silica gel is suitable for the baby industry, daily necessities industry, kitchen supplies, electronic product encapsulation, etc.
3. Platinum vulcanized low-temperature silicone meets ROHS and other environmental protection requirements, and has passed the US FDA certification. And the European Union LFGB food standard testing.
Advantages of platinum silicone products:
1. Low molding temperature
2. Suitable for compression molding
3. Fast curing, no peculiar smell
4. The primary vulcanization is completed, no secondary vulcanization is required (LFGB requires secondary vulcanization)
Remark: general color is natural, any customized color accepted.
Data sheet:
Grade | ES240H-1 | ES250H-1 | ES260H-1 | ES270H-1 |
Hardness, Shore A | 40 | 50 | 60 | 70 |
Tensile Strength, Mpa | 8 | 9 | 9 | 9 |
Elongation at break, % | 800 | 600 | 500 | 400 |
Tear Strength, Kn/m | 26 | 28 | 30 | 30 |
Density, g/cm3 | 1.13 | 1.16 | 1.18 | 1.19 |
Plasticity, | 180 | 220 | 250 | 290 |
Picture show: